The precaution of using the solenoid valve




1.(solenoid valve) During installation, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install it where there is direct dripping or splashing. The solenoid valve shall be installed vertically upward;

2. (solenoid valve)The solenoid valve shall ensure normal operation within the fluctuation range of 15% - 10% of the rated voltage;

3. (solenoid valve)After the solenoid valve is installed, there shall be no reverse differential pressure in the pipeline. It needs to be powered on for several times to make it suitable for temperature before it can be officially put into use;

4. The pipeline shall be thoroughly cleaned before the installation of solenoid valve. The medium introduced shall be free of impurities. Filter installed in front of the valve;

5. When the solenoid valve fails or is cleaned, a bypass device shall be installed to ensure the continuous operation of the system.
Navigation